1. Before using, check whether the fasteners are tightened, the rotating part is flexible and whether there is lubricating oil in each bearing. The sheller should be placed on a stationary surface. 2. After the motor starts, the steering of the rotor shall be in accordance with the direction indicated on the machine tool. Take a few minutes to see if there is any abnormal noise, and after normal operation, you can feed the peanuts evenly. 3. When the peanut is feeding, it should be evenly and evenly. It should not contain debris, rocks and other debris, so as to avoid breaking the peanut and causing mechanical problems. When the peanut is covered with a sieve, the rice mouth switch can be opened. 4. Select the suitable sieve according to the size of the peanut. 5. When peanut shells are increased in peanuts, the motor can be moved down to tighten fan belt and blow up air volume. 6. When operating, do not stand on the belt drive side to avoid injury. 7. For a period of time, when the machine is ready to be stored, the dust, dirt, dirt and remaining seeds of the seeds should be removed, and the belt will be removed and taken into custody. Wash parts of the bearings with diesel oil and dry them with butter. The machine should be covered in a dry warehouse to avoid the sun and rain. 8. Adequate lubricating oil shall be ensured in the transmission parts and bearing and shall be cleaned and replaced regularly. Pay attention to the daily use of peanut machinery and equipment, which can achieve better use effect, thus making the service life of the equipment longer.
